Discovery of a Father

In â€Å"Discovery of a Father† by Sherwood Anderson and â€Å"Those Winter Sundays† by Robert Hayes, Sherwood and the speaker both don't affirm of their fathers’ activities yet start to value them later on. First and foremost as little fellows, both of the children are inadequate with regards to the gratefulness for their dads. In â€Å"Discovery of a Father†, Sherwood doesn't care for the way that his dad is a narrator and how his dad would lie about his nationality and take somebody else’s as his own. For instance, Sherwood reviews, â€Å"If an Irishman went to our home, immediately father would state he was Irish. On the off chance that it was a Scotchman something very similar happened† (5). Sherwood’s father is likewise a joker and somebody who is missing for significant stretches of time in their family’s life which Sherwood additionally disdains. Sherwood additionally can not see how his mom could endure it. Like Sherwood, the speaker uncovers his father’s unlikeable qualities. The speaker doesn't care for the way that his dad has an unlikeable temper. He communicates how his father’s temper is brought about by his extended periods of time at work and the absence of gratefulness. The speaker spends his childhood â€Å"fearing the constant infuriates of the house† (Hayes 9). So soon every child comes to realize that his dad really loves him. Despite the fact that this aversion for both Sherwood’s and the speaker’s father’s activities happen, they additionally both experience a change in outlook when they understand that they have some kind of motivation to New 2 love their dads; on the grounds that their dads love them. Sherwood’s father exhibits such love when he takes him swimming in the lake which allows them to interface with each other. Sherwood reviews that â€Å"it was an inclination of closeness†¦It was as if there were just we two in the world† (Anderson 8). Amusingly, Sherwood’s father is typically perky and empowered however during that night he turns out to be totally genuine and quiet. At that point Sherwood identifies with his dad when he sees that his dad is a narrator as well as he himself is too. Then again, the speaker finds his father’s love when he is more established when he recalls when his dad showed a couple of demonstrations of benevolence to him when the speaker says, â€Å"had driven out the cold/and cleaned my great shoes well† (Hayden11-12). Along these lines the children in both â€Å"Discovery of a Father’ and â€Å"Those Winter Sundays† each have their eyes open to an affection that they thought was not there however consistently was.

Developmental studies

Toward the start of the twentieth century immature nations started to search for the approaches to decrease their reliance on rural fares and to welcome on a mechanical unrest. The circumstance which evoked this need was basic. The issue was that the immature nations grew chiefly the approaches of supporting essential product sends out. Transportation arrangement was utilized in the foundation for conveying the fare harvest to the harbour.The look into establishments spent significant time in agribusiness worked distinctly on improving yields for send out, for instance, sugar stick, espresso, cotton, etc.â while crops for household utilization, for example, beans or manioc corn, potatoes, left with close to nothing or even without consumption. Subsequently a portion of the immature nations needed to follow the approach of import replacement to incite industrialization. Import replacement industrialization will be the objective of investigation of this paper. This financial strategy will be examined in the edges of a monetary term with the essential qualities and furthermore in a more extensive importance as the experience of the nations of East Asia and Latin America.In the procedure of research various perspectives, both star and contra, will be refered to so as to reveal the insight into positive and negative angles and spread the field comprehensively. In the finish of the paper the fundamental discoveries will be summarized. The term of import replacement can be characterized as a financial procedure and as an arrangement system. As a procedure import replacement identifies with the circumstance â€Å"where areas (all the more unequivocally, existing or new financial exercises inside districts) take up the creation of products or administrations which earlier were imported, be that as it may, for whatever reasons, presently can be feasibly delivered inside the locale (for example because of populace expands prompting increments sought after or because of profitability increments bringing about more noteworthy intensity. †(Economic Geography Glossary, 1999)Import replacement industrialization (ISI) as the monetary technique implies empowering the advancement of local industry by restricting fabricated merchandise import. The need of ISI usage excites from the conviction that there is a potential near bit of leeway in a portion of the ventures of creating nations, yet these enterprises are excessively frail yet to rival remote entrenched ones.Thus, so as to permit newborn child businesses to set up themselves and to understand their latent capacity, and therefore to have the option to contend globally, governments should bolster the underlying time of their turn of events. The insurance of government suggests brief estimates, for example, utilizing duties or import shares to begin industrialization in the nation. As an arrangement methodology import replacement can be utilized to accomplish the accompanying objectives: 1) to use the limits which are underused; 2) to battle joblessness in the regions;3) to ensure newborn child businesses. The strategy of import replacement industrialization, as indicated by the definition gave by the reference book, is â€Å"a exchange and monetary arrangement dependent on the reason that a creating nation should endeavor to substitute items which it imports, for the most part completed merchandise, with privately delivered substitutes. †(Wikipedia, 2005) The hypothesis of import replacement has a lot of regular with the hypothesis of mercantilism. Both the speculations advance insignificant imports and high fares as the methods for initiating the development of national wealth.In request to execute the approach of import replacement industrialization, the accompanying three primary fundamentals must be sought after: 1) defensive boundaries to exchange, which can be set up as duties. Taxes or custom obligations are applied to the merchandise which are imported and al ong these lines they misleadingly shield residential enterprises from rivalry with remote organizations; 2) a specific mechanical arrangement, which coordinates and sponsors creation of the substitutes; 3) a money related approach, which will keep the local cash overvalued.Monetary strategy is executed by setting save necessities and changing some financing costs straightforwardly or in a roundabout way. The central instruments of money related approach are activities in open market. In open market cash flows through the selling and purchasing of deferent outside monetary standards credit instruments, or wares. Such deals or buys make a specific base money which leaves or enters advertise dissemination. Normally open market tasks are planned for accomplishing a particular transient loan fee target.However, money related strategy may likewise focus on a specific â€Å"exchange rate comparative with some remote cash or, more than likely comparative with gold. † (Wikipedia, 2005 ) Equally significant is to take note of that import replacement as financial protectionalizm can have negative results. Stutz brought up that â€Å"This type of monetary protectionism helped a few nations industrialize before yet includes financial dangers. † (Stutz and Souza, 1998) The dangers of import replacement implied by Stutz are potential wasteful aspects and higher prices.Successful usage of this approach when in doubt needs huge use on framework. Furthermore, import replacement is joined by the foundation of state firms in the zones of industry which are believed to be excessively unsafe or unreasonably enormous for the private part (or model, steel, airplane) or evaluated to be too imperative to ever be claimed by outside firms (or occasion, oil). The strategy of import replacement industrialization was contended by the backers of outright facilitated commerce theory.Generally, organized commerce becomes conceivable when the progression of administrations and merc handise between nations isn't burdened. Specifically, the business analysts who upheld organized commerce approach expressed that financial methodology would get effective just under the accompanying conditions: 1) worldwide exchange administrations must be without exchange boundaries, or levies; 2) universal exchange of merchandise must not be liberated from any potential duties (in particular expenses on imports) or exchange hindrances (for instance, portions on import); 3) the free development of global work; 4) the free development of universal capital;5) the nonattendance of any monetary protectionalizm, executed in terms of professional career misshaping arrangements (for example, endowments, guidelines charges, or laws), which gives a favorable position to local firms, components of creation, and family units over outside ones. In this way, it becomes clear that facilitated commerce defenders upheld the arrangement which completely negated the essential fundamentals of import replacement industrialization. Then again, unhindered commerce advocates recommended that a remote sponsorship ought to be considered as another of relative bit of leeway and therefore household obstructions ought not be forced on the acquisition of merchandise delivered overseas.Free exchange market analysts brought up that boundless imports will be valuable for residential buyers which overweighs the loss of local makers. In this way, the lower costs of remote endowments can be considered as net positive. In this way, the household society where any import limitation is applied becomes â€Å"a entire more terrible off than it would be with boundless imports. † (Wikipedia, 2005) Anyway, the perspectives of the two hypotheses †import replacement industrialization and total facilitated commerce †were checked during the time spent their execution and, all things considered, experience.In the period from 1930 to 1940 the approach of import replacement industrializatio n was received in many immature nations of Latin America. The main impetus which encouraged the acknowledgment of import replacement thought was the Great Depression which occurred in 1930s. As indicated by article Concern with Policy-importance in the Latin American School of Economics composed by Bianchi, â€Å"Import replacement was an essential condition for fringe development, in relationship with basic changes in the economy.The spotlight ought to be put on the strenghtening of the local market, which was viewed as the significant component of an internal looking model of improvement. † (Bianchi A. M. , 2003) Later on, during the 1950s Raul Prebisch, the unmistakable Argentine financial expert, communicated his conviction that the best way to prevail for creating nations was to work forward linkages locally and to make ventures which would chip away at essential items previously delivered by the nations themselves. The approach of duties would push the local business to prosper.By executing the strategy of import replacement industrialization in the period from 1950 to 1970 various Latin America nations, specifically Mexico, Brazil, Argentina, Chile, Uruguay, endeavored to arrive at positive outcomes and to expand their national riches. The achievement of the arrangement in these nations depended on either high expectations for everyday comforts or enormous populaces. Nonetheless, more unfortunate and littler nations, for instance, Dominican Republic, Ecuador, Honduras, were not fruitful in embracing import replacement policy.Also it is eminent that the nations which prevailing in import replacement industrialization figured out how to change the structure of their administrations. Hence neo-imperialism fallen and was supplanted by vote based method of overseeing. Nationalization transformed banks and utilities into open property and came back to country a portion of the organizations recently claimed by outsiders. An instance of execution of impo rt replacement industrialization can be inspected with the assistance of the case of Brazil.Brazil was the nation which conveyed the arrangement of import replacement industrialization later than other immature nations. The financial analysts in Brazil painstakingly dissected its belongings and were arranging the modern improvement of the nation while different nations began import replacement primarily unintentionally. Note that Brazil at first had all the odds for achievement in the strategy of import replacement, since its populace goes up to 170 million, which makes Brazil the fifth larg

The Game

The ‘Game’ So last week, I made a trek out to the school down the street for The Game. This was my first time in all four years that Id been at MIT that I had the chance to go to the game. We started off by visiting the undergraduate party for food galore. My friend, Steph 07 Me and Elyse 07 (I have a weird dancing face) Mitra, Steph, and Me Now the game was one thing, but I think we decided that the more clever competition was in the t-shirt designed specifically for the game. (Disclaimer: These photos are in no way intended to discourage you from applying to Yale.) And WAIT! This really is not just a rivalry of two schools, MIT is in the mix too. MIT has a long standing tradition of hacking the football game. From Wikipedia: The most famous exploit was carried out at Harvard Stadium during the second quarter in 1982, when a Harvard score was immediately followed by a huge black weather balloon, previously installed under the 45 yard line by students from MIT as the letters painted on its side proclaimed, slowly inflating until it exploded, spraying talcum powder over the field (Harvard won, 45-7). This year was no exception: See if you can spot the hack.

There Will Be Blood Movie Relations to Environmental Law...

4/26/2012 Environmental Law and Policy Third Assignment â€Å"There Will Be Blood† Environmental Issues and Connections â€Å"There Will Be Blood† by Paul Thomas Anderson starring Daniel Day Lewis reproduces the early 1900s oil boom in southern California. Daniel Day Lewis plays a man named Daniel Plainview, the very serious boss of a drilling company. After adopting a son early on in the movie for purely business reasons he leads us on the path of innovation and growth within a new industry. His depictions of oil drilling in the turn of the 20th century present endless environmental law issues. These issues have resulted in the regulation of an industry, countless strains on the environment and the contributing factors to many of the†¦show more content†¦Along with the rising population is always a strain on the environment. This has been true about agriculture for hundreds of years. Without the oil, the town would not have grown to be agriculturally fit. The oil industry was a new industry in the setting of the film. However a few times throughout we see causalities in the workplace, including the deafening of Plainview’s son H.W. Because the industry was new it was not regulated. For the various depictions in the film are why regulation is vital today. The accidents in the movie are the results for laws like the Occupational Safety and Health Act. This law ensures that all employees are subject to safe working conditions. The oil industry is not the only reasons for this law, it covers a lot of industries health and safety rules. Various administrations would make sure equipment is safe enough so we can avoid accidents like the ones that happened in the wells to the men. When Oil is burned so we can use it for energy it emits a lot of toxic gases including CO2. Burning oil pollutes our air and is a harm to our environment. The Environmental Protection Agency, a federal agency to protect human health and the environment must e nforce the Clean Air Act. Burning oil and other dirty energy sources like coal can deplete the ozone but also putShow MoreRelatedIntel Code of Conduct6773 Words   |  28 PagesSometimes, the right action isn’t obvious. But we have our compass: a mission, a set of shared values, and our Intel Code of Conduct. This Code of Conduct represents Intel’s expectations of what it means to act ethically and within the boundaries of the law. Understand the Code. Discuss it, follow it, use it. Find the resources on the Ethics and Compliance intranet site to help you apply the Code to your day-to-day work. The Code is the standard of conduct that unites us, strengthens and allows us to continuouslyRead More Youth Smoking and Prevention Essay3811 Words   |  16 Pagesinflammation of the bronchial tubes. In accordance with these diseases are both long- and short-term effects. From the first puff of a cigarette, the body immediately reacts to the chemicals. Nicotine causes a short-term increase in blood pressure, heart rate, and the flow of blood to the heart (â€Å"Tobacco†). As a result, this can often lead to premature coronary heart disease (CHD) (Brodish, 8). Long-term effects of smoking have been documented to cause chronic lung disease, stroke, blindness, as well asRead MoreThe Political Impact of 9/113412 Words   |  14 PagesAmerica would be forever questioned by its constituents; a person s immediate national origin distinction would become as important and identifiable as a person s blood type. By no means am I arguing that readily identifying a person by their skin pigmentation is as accurate as a blood test; but I am articulating that, what your blood actually is would no longer matter; only what you looked like would. The definition of who and what an American i s would definitely be made clear after 9/11; the preconceivedRead MoreA Brief History of Mcdonald3450 Words   |  14 Pagesrecruiting McDonalds workers, was involved in a union dispute at a chicken processing plant supplying McDonalds. The union launched a boycott of McDonalds McNuggets and picketed many of its stores. Stan Stein (McDonalds Head of Personnel and Labour Relations) spent up to 80% of a whole year fighting the unions campaign. 1984 †¢ Founder Ray Kroc dies. †¢ James Huberty shoots 22 people dead at a McDonalds in San Diego (USA). †¢ 50 billionth hamburger sold. †¢ Ronald McDonald Childrens CharitiesRead MoreOverview of Hrm93778 Words   |  376 Pagesorganizing, staffing, leading, and controlling. HR management involves the policies and practices needed to carry out the staffing (or people) function of management. HRM department regardless of the organization’s size must perform following human resource management functions†¦ †¢ Staffing (HR planning, recruitment and selection) †¢ Human resource development †¢ Compensation and benefits †¢ Safety and health †¢ Employee and labor relations †¢ Records maintaining, etc. †¢ HR research (providing a HR informationRead MorePsychology Ncert Book 1 Chapter Notes11190 Words   |  45 PagesBehaviours are responses or reactions we make or activities we engage in. When something is hurled at you, your eyes blink in a simple reflex action. You are taking an examination and can feel your heart pounding. You decide to go for a particular movie with a friend. Behaviours may be simple or complex, short or enduring. Some behaviours are overt. They can be outwardly seen or sensed by an observer. Some are internal or covert. When you are in a difficult situation while playing a game of chessRead MoreBCH190 Essay14810 Words   |  60 Pagesacids to complex carbohydrates (D) gas to liquid to solid (E) primarily viruses 20. A Pipetman is: (A) the new biomedical device made by tissue engineeringand now used to treat the damaged blood vessels of heart attack victims (B) a radical group of bioengineered superheroes inthe Hollywood movie GATTACCA (C) a molecular biology tool used in the lab to measuresmall volumes of liquid common in biotechnology (D) a new type of bio-engineered crop plants that are drought tolerant (E)Read MoreThe Role of Advertising in Marketing Communications9872 Words   |  40 Pages PUBLIC RELATIONS AND PUBLICITY – A variety of programs designed to promote or protect a company’s image or its individual products. Marketers tend to under use public relations, yet a well thought out program coordinated with other communications mix elements can be extremely effective. The advantages of public relations are as follows: High credibility: News stories and features are more authentic and credible to readers than ads. Ability to catch buyers off – guard: Public relations can reachRead MoreContemporary Issues in Management Accounting211377 Words   |  846 Pagespublished 2006 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, without the prior permission in writing of Oxford University Press, or as expressly permitted by law, or under terms agreed with the appropriate reprographics rights organization. Enquiries concerning reproduction outside the scope of the above should be sent to the Rights Department, Oxford University Press, at the address above You must not circulateRead MorePopular Culture and Violent Behavior Essay11795 Words   |  48 PagesPopular Culture and Violent Behavior Introduction In 1871 E.B. Taylor defined culture as that complex whole which includes knowledge, belief, art, morals, law, customs, and many other capabilities and habits acquired by...[members] of society.[1] Taylor was talking about high culture, an aristocratic view of the past-times such as ballet, theatre and art. Popular culture, on the other hand, is a form of low culture and is based primarily on marketing

Why College Athletes should be paid - Free Essay Example

Sample details Pages: 6 Words: 1914 Downloads: 10 Date added: 2019/06/12 Category Career Essay Level High school Tags: Should College Athletes Be Paid Essay Did you like this example? As the end of high school approaches, some student- athletes have the option to play a sport in college. One question they may ask themselves would be, Is it worth it to play a sport in college?, considering all the time put into the sport while having to maintain good grades. You must be a very hard-working person to be a college athlete as it is basically a full-time job jumping between the classroom, field/court, weight room, and watching film. Don’t waste time! Our writers will create an original "Why College Athletes should be paid" essay for you Create order Imagine you are a college athlete; your daily routine would consist of waking up early most days for practice. After the morning practice, you attend classes towards earning your college degree. Then, since you frequently miss class and are struggling to keep your grades up, you have a tutoring session. Lastly, to finish your day off, you have more practice which will likely end late. Athletes have to follow this routine the whole school year. This routine does not include any extra-curricular or social activities. With all the athletes time going towards their sports and studies, they lack time to work a job to have extra spending money. There are several reasons supporting why college athletes should be paid. One is the athletes do not have enough time to hold a steady job because they are constantly practicing or playing the sport, they are involved in. College is expensive, and many athletes are not given scholarships to help pay for tuition, room and board, or books. This can lead to an increasing amount of debt because they must borrow money to pay for college. Many people believe athletes should get paid for their hard work, while others believe that it would ruin the integrity of college sports if athletes were paid. When the National Collegiate Athletic Association (NCAA) was founded by President Roosevelt in 1906, there was a commitment that a salary would not be provided to the student-athletes who took part in its athletic organization. This was based on the idea that college athletes should be considered amateurs, not professionals. In contrast, todayrs lucrative television contracts have become the driving revenue force behind an institutionrs ability to thrive in college athletics. Recently, for example, numerous universities have changed their athletic conference affiliation because of increased financial incentives. According to Businessinsider.com, college athletes spend over 30 hours on average a week just in practice while some reported they spent over 40 hours (1). But college athletes are not required to simply play sports 40 hours a week. Their schedule also includes a full-time college schedule that they must maintain if they want to stay in the school and continue playing college sports. For example, if a student has 10 hours of class each week and puts in the recommended four hours of study for each hour of class, then athletes spend 50 hours each week studying and attending mandatory classes and study halls. This means that college athletes have to work 90 hours per week just to remain in school on their scholarship. This is the equivalent to working two full-time jobs with a side job on the weekends just to pay their bills (Anderson 1). The debate about whether college athletes should be paid, is not a new concept. Some people believe that a scholarship should be payment enough. After all, a scholarship can be easily worth $25,000 or more per year, plus a career after college that can be worth a million dollars over a lifetime. Additionally, student- athletes receive all kinds of perks while they are in college, like staying at fancy hotels, being seen on national tv, and all the notoriety that goes with being a star athlete. It is hard to put a price tag on all of that. But if you really take a look at the facts about scholarships, you might change your mind. Only about one out of every three student-athletes receive a scholarship. Most who receive scholarships find that they only pay for part of the expenses. With all the time and energy, they put into sports: college athletes should be considered employees rather than students because their first duty is to play sports for the university, ahead of obtaining an e ducation (Zepel and Staudohaur 1). After all, although the NCAA claims college athletes are just students, the NCAAs own tournament schedules require college athletes to miss classes for nationally televised games that bring in revenue. A college coaches job is to recruit players who they think have the talent to make them win. Many times, they persuade them to come to their school by offering them scholarships. The whole idea behind a scholarship is to lure the athlete into coming being a student and athlete at their college. Scholarships are nothing more than a recruitment tactic. Indeed, many times these scholarships pay for tuition, room and board, and books, but these athletes dont have money for other necessities. When providing a service, people normally get paid for the service, so college athletes should be paid for performing a service with their athletic abilities. They offer entertainment to millions of fans each year. Almost anyone who is involved with sports, whether it be watching them or playing them, has an opinion on whether college athletes should be paid. College sports make billions of dollars, so there is room for athletes to be paid in some way. The financial outlook for the NCAA is completely different than it was even 10 years ago. The NCAA basketball tournament generated $9 million per year in 1981, $215 million per year in 1997 and generates approximately $750 million per year now. Without the athletes, this revenue would not be possible, yet they are still unpaid. Even if scholarships would be considered pay, student-athletes are underpaid in proportion to what they generate for the college. For example, in professional football and basketball, for example, players are paid approximately one-half of the revenues generated (Should College Athletes Be Paid? 10). By no means should college athletes be paid as much as professional athletes, but they deserve a little incentive for all their hard work in their respective sport and in the classroom. Furthermore, the NCAA currently produces nearly $11 Billion in annual revenue from college sports more than the estimated total league revenues of both the National Basketball Association and the National Hockey League (Edelman 1). It does not seem rational that the NCAA, the colleges in the NCAA, and some coaches of the athletic program make a substantial amount of money, but the athletes do not see any of this money. In support of this look at the following statistics according Edelman, last year, the average salary for a BCS eligible football coach was $2.05 million, the average salary for a premier NCAA Division I mens basketball coach also exceeded $1 Million, and in 40 of the 50 U.S. states, the highest paid public official is currently the head coach of a state universityrs football or menrs basketball team (1). Athletes arguably do the most work out of any of these groups and are who draw in the fans, so it does not make sense that they do not receive any of the profit made from college athletics. College athletics is a billion- dollar industry and has been for a long time. Due to the increased ratings of college athletics, this figure will continue to rise. The athletes being recruited for college sports are bigger, faster and stronger than ever and will generate more money due to the number of fans who watch each week. College Universities generate so much revenue during the year that it is only fair to the players to receive part of that as compensation. College athletes should get paid based on the universityrs revenue from the sport and the apparel sales. It is very difficult to put a numeric value on exactly how much an athlete is worth to a college. A star quarterback will not only help sell tickets but will bring in plenty of merchandise sales as well. The NCCA prohibits the universities to sell a college football jersey with a players name on it, but they can sell the jersey with the players number on it, which is easily recognizable in local, and sometimes national markets. While the university can capitalize on the notoriety of its players; the players are not allowed to do this themselves. NCAA rules state that student-athletes are not allowed to use their college athletic abilities for promotional purposes or monetary gain. As stated by Anderson this means that a well-known athlete cannot charge money for the hours spent signing autographs, but the university is able to use the athlete to generate hundreds of thousands or even millions of dollars through sales and increased enrollment (Anderson 1). Also, important to note: in a 1989 survey of professional football players, 31 percent of the respondents admitted to having accepted illegal payments during their college careers, and 48 percent of the respondents said they knew of other athletes who took such payments during college (Porto 41). College athletes most likely would not feel the need to break the rules if they received compensation that assisted them to pay their bills. With these factors in mind, Division I football, and menrs basketball players do not merely play a sport of leisure. Rather, they are core members of their universityrs marketing team, as well as the labor force behind a lucrative secondary industry in hosting organized sporting events. Itrs also important to note that college student-athletes are not only a part of a sports team; they are a part of the college or universityrs advertising team. Success in college sports is also believed to improve the application rates and caliber of admitted students at certain universities. For example, consider: the Flutie effect is used to describe a surge in college admission following a big sports win. Itrs named for Boston College quarterback Doug Flutie; he won the Heisman Trophy in 1984, and the Collegers admissions rose significantly in subsequent years†though the extent of Flutiers impact has been largely refuted by BC officials since then(Martinez 1). Still, colleges and universiti es use their athletic success to promote their school and entice potential applicants. Student-athletes would be paid for this and all the additional benefits they provide for their schools. Lastly, a small salary would also teach student-athletes how to save. Think about the advantage, saving is an incredibly important skill that many young people dont take part in either because they do not earn enough money to create a savings account or because they do not understand the importance of saving (Anderson 1). Life skills are an important aspect of college and playing sports, why not use their athletic abilities to help them succeed further in these skills. In conclusion, almost anyone who is involved with sports, whether it be watching them or playing them, has an opinion on whether college athletes should be paid. Based on how the NCAA has evolved over time and the amount of income they generate, college athletes should get paid for the time that they put into their respective sports. The time that they dedicate to their sport is equivalent to the time someone puts into a full-time job, if not more. Only one- third of college athletes receive a scholarship, the majority of those are partial, and only one percent of all college athletes make it to the pros. Since most college athletes do not receive a full ride and do not go pro, colleges should pay the athlete as if their sport was their job to help them pay off college and other expenses.

Waste Management individual coursework Free Essays

Brief overview The modern day industrial societies are concerned with environmental protection and sustainable use of natural resources. A lot of waste is generated by businesses, households and the construction industry globally on daily basis. Engineering has a role in designing ways of effectively managing waste through various means like green technology and exploiting waste to produce alternative sources of energy (Worrell Vesilind, 2012, p. We will write a custom essay sample on Waste Management individual coursework or any similar topic only for you Order Now 71). The management of waste through proper disposal or recycling is important in protecting the environment. Engineering has a great role in ensuring sustainable use of natural resources and environmental protection. Mechanical engineers are actively engaged with how the society uses natural resources. It discovers, designs, maintains, improves and repairs machineries like cars, airplanes and industrial equipment which human beings depend on for their daily lives (Wang Koh 2010, p. 49). In the future, mechanical engineering will deliver solutions that will sustain and protect the existence of man on the planet. There are two major ways in which engineering can help in mitigating the problem of waste management which are preventing waste in engineering and management of waste. The next section will look at the two methods, their advantages, disadvantages and cases where they have been used successfully. Waste prevention (Designing out waste in mechanical engineering) Green manufacturing is an emerging concept in engineering that aims to achieve sustainable development in the manufacturing industry. Dornfeld (2010, p. 56) defines green manufacturing as the creation of manufactured products that use processes that conserve energy and natural resources, are non-polluting and are economically safe and sound for users. There is an increasing need for mechanical engineers and engineering in general to innovate new ways of creating products that minimise waste of resources. Rynn (2010, p. 87) asserts that for mechanical engineering to be able to design products that are friendly to the environment, issues of sustainability should be part of all the decision making processes in engineering. This covers all the steps from product design to its end life and after that the needed efforts in regaining its value rather than disposal. The main objective for green manufacturing is to produce products that can be remanufactured, recycled or reused. As such green manufacturing process reduces the environmental impact of a manufacturing process than it was in the past. Green manufacturing systems include measures to reduce the volume of hazardous waste produced, change the energy mix to include the use of more renewable resources and cut down the volume of coolant consumed in the manufacturing process. The other measure that reduces waste of resources is lean manufacturing which has been successfully used by Toyota in its manufacturing plants. The lean manufacturing system as used by Toyota managed to reduce seven types of wastes in the company’s manufacturing process. Toyota reduced overproduction, inventory, transportation, motion, over processing, defects and waiting times (International Conference on Mechanical Engineering and Green Manufacturing Li 2010, p. 77). Most of these wastes are related to the des ire to minimise the environmental impacts of the manufacturing process. For instance, a reduction in the waiting times saved company resources like lighting and air conditioning. Many machines used in the production process consume a lot of energy even when not processing any products. As such the idle time used for allowing the smooth flow of products wastes a lot of energy. The lean manufacturing processes, initiatives, strategies and techniques are advantageous in terms of reducing operational costs and also aim at boosting, restoring and significantly improving organisational competitiveness. Lean manufacturing reduces the manufacturing time by eliminating the wastes in the manufacturing process. A reduction in manufacturing time leads to a subsequent reduction in operational costs in the form of labour, energy and other utilities. In so doing, it helps organisations in retaining, maintaining and significantly increasing their revenues, widening their margins and generation of savings from lowering costs. Lean manufacturing helps companies in saving space which raises the levels of efficiency and savings. According to Davim (2013, p.64), lean manufacturing has a potential of increasing the productivity of a company by approximately 75% to 125%. This is because the elimination of wastes and any other unnecessary practices at the workplace assists the e mployees to work without distractions and in so doing maximise output. The elimination and reduction of waste in the production process helps the companies in increasing earnings and profits by reducing wasteful use of resources. In addition to this, the elimination of unnecessary tasks and job positions helps companies in reducing labour expenses and in return increase their earnings (Skrabec 2013, p. 33). Despite the aforementioned benefits that come with lean manufacturing, there are various barriers that prevent organisations from fully implementing it in their manufacturing processes. The capital cost requirements of emission control and waste management are extremely high with long payback period (Worrell Vesilind, 2012, p. 88). This makes it very difficult for most companies as this translates into higher product prices which would drive away potential customers. In other instances the capital input exceeds the direct economic gains thus frustrating the successful implementation of green manufacturing. The other barrier is that the manufacturing industry relies on certain technologies and processes that may cause undesirable effects but cannot be ignored like the volatile organic compound used in automotive manufacturing. Waste management (use of recycling and reuse) Waste management entails reducing the amount of waste that the manufacturing industry disposes on the environment (Ku?hnle 2010, p. 96). In reusing and recycling of waste products, the manufacturing industry reuses old or waste products to produce new products. Waste management reduces environmental pollution, energy usage, air pollution, water pollution and consumption of fresh raw materials by reducing the reliance on conventional waste disposal (Hesselbach Herrmann 2011, p. 54). The manufacturing firms should therefore aim at reducing waste at each and every phase of the production process. The first step is to identify the areas where waste is high in the manufacturing process and then find out what needs to be recycled using cost benefit analysis. Nikon has successfully managed to do this and is recycling its wastes to produce new products. Recycling of old products is important because it helps in environmental conservation. Reusing of resources relaxes the strain placed on natural resources which are increasingly getting depleted. The other advantage of recycling old products is that it reduces energy consumption (Shina 2008, p. 65). The manufacturing process uses large amounts of energy in processing the raw materials into finished products. Recycling helps the manufacturing companies in minimising energy consumption which is important for massive production like refining and mining. In addition to this, it also makes the production process effective in terms of cost which raises the margins for the manufacturers (Association for Manufacturing Excellence 2008, p. 162). Although product recycling is very beneficial to the manufacturers, there are some barriers that hamper the successful implementation of recycling old products in the manufacturing process. The first barrier is that the recycling process is not always cost effective because at times companies are forced to open up new factories thus raising their operational costs (Wang et al 2011, p. 22). A new factory by itself may even cause more pollution in terms of transportation, cleaning and storage. Other than operational challenges, the other major limitation of recycling is that the recycled products are not always as durable as the original products. Products made from trashed waste are cheap and less durable and may not generate sustainable revenue for organisations like other products. Key lessons learnt and how these can be used to improve the future Both lean manufacturing and waste reuse are important in reducing wastes that emanate from the manufacturing processes. Lean manufacturing should be used in eliminating wastages in the production process in order to ensure that organisations minimise operational costs. However, the findings reveal that both methods should be implemented in the manufacturing process in order to improve the waste management in mechanical engineering. Key conclusions and recommendations Waste management should be included in all the stages of the manufacturing process in order to ensure sustainability in engineering. Owing to the fact that the quality of recycled products is often lower than the other original products, it is recommendable to embrace lean manufacturing in order to ensure that wastages are eliminated in the production process. References Association for Manufacturing Excellence (U.S.) (2008). Green manufacturing: Case studies in lean and sustainability. New York: Productivity Press. Davim, J. P. (2013). Green manufacturing processes and systems. Heidelberg: Springer. Dornfeld, D. (2010). Green Manufacturing: Fundamentals and Applications. Berlin: Springer US. Hesselbach, J., Herrmann, C. (2011). Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Technische Universita?t Braunschweig, Braunschweig, Germany, May 2nd – 4th, 2011. Berlin, Heidelberg: Springer Berlin Heidelberg. International Conference on Mechanical Engineering and Green Manufacturing, Li, S. (2010). Mechanical engineering and green manufacturing: Selected, peer reviewed papers from the International Conference on Mechanical Engineering and Green Manufacturing (MEGM) 2010, November 19-22, 2010, in Xiangtan, China. Stafa-Zurich: TTP, Trans Tech Publications. Ku?hnle, H. (2010). Distributed manufacturing: Paradigm, concepts, solutions and examples. London: Springer. Rynn, J. (2010). Manufacturing green prosperity: The power to rebuild the American middle class. Santa Barbara, Calif: Praeger. Shina, S. G. (2008). Green electronics design and manufacturing: Implementing lead-free and RoHS-compliant global products. New York: McGraw-Hill. Skrabec, Q. R. (2013). The green vision of Henry Ford and George Washington Carver: Two collaborators in the cause of clean industry. New York: Productivity Press. Wang, L., Koh, S. C. L. (2010). Enterprise networks and logistics for agile manufacturing. London: Springer. Wang, L., Ng, A. H. C., Deb, K., SpringerLink (2011). Multi-objective evolutionary optimisation for product design and manufacturing. London: Springer. Worrell, W. A., Vesilind, P. A. (2012). Solid waste engineering. Australia: Cengage Learning. How to cite Waste Management individual coursework, Essay examples

Mechanics of Writing Essay Example

Mechanics of Writing Paper What is mechanics in writing? The goal of the mechanics of writing is to make the writing precise and grammatically correct. It is directed to make the writing systematic and being concerned about how to be correct in spelling, punctuation, italics and so on. The mechanics of writing are the rules that must be followed while preparing research paper so that the research strategies and the format becomes systematic and consistent in all academic sectors. If one does not follow or if there are no such rules of writing then the writing would be certainly very difficult. Factors in mechanics of writing The important factors in mechanics of writing are: Spelling Punctuation Italics( underlying) Names of persons Titles of works in the research paper Quotations Capitalization and personal names Spelling Spelling in the research work should be consistent, clean and correct expert in quotations. The spelling in the quotation must be the original whether correct or incorrect. If we have to divide any words, we should not do so at the end of the line. If the word does not fit there, we should leave the space and bring the words in the next line. Punctuation The purpose of punctuation is to bring clarity in writing and to make it comprehensible. Punctuation clarifies sentence structure, separating some words and grouping others. It adds meaning to written words and guides for readers to understand as they move through sentences. Commas, full stops, semicolons, colons, dashes and parenthesis, hyphens, apostrophes, quotation marks and exclamation point all serve the function of punctuation and one should take account of all these marks while writing research works. Italics (underlining) We will write a custom essay sample on Mechanics of Writing specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Mechanics of Writing specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Mechanics of Writing specifically for you FOR ONLY $16.38 $13.9/page Hire Writer In research papers and manuscripts submitted for publication, words that would be italicized in print are usually underlined. In general, we should underline foreign words used in an English text. The name of the book in which a person is doing research is always italicized. Names of Persons Generally, a researcher should state a person’s name in a text of his or her research paper fully, accurately and exactly as it appears in the original source. For example, Martin Luther King, Jr. should be used as it is not as only Martin Luther. A researcher must not use formal titles in referring to men as women, living or dead, such as Prof. Devklota. Dr.Sangita. Instead of it, the researcher should only write Devkota, Sangita and so on. Titles of works in the Research Paper Title of the publication works in the research paper should be cited form the title page not form the cover page. For capitalizing titles, one should capitalize the first words, the last words, the words and the principal words, the last words and the principal words in both titles and sub-titles. Generally title of the works must be underlined or italicized. Title of the names of books, pamphlets, periodicals, films, radio and television programs etcetera should be underlined if hand written or italicized if printed in the research paper. Titles of the names of articles, essays, short stories, short poems, chapters of book and so on should be put with in quotation marks. The same is for the case of unpublished work, such as lectures and speeches. Quotations Only the most important words, phrases, lines and passages should be quoted in the research paper as briefly as possible. The researcher should put them with in quotation mark if they are three lines or less than three lines. If a quotation runs to make than four lines, it should be put under indent. Capitalization and personal names The chief reason to capitalize a word is that the word is proper, not because the word has greater status than other words. A proper noun identiï ¬ es a speciï ¬ c member of a class. A common noun, on the other hand, denotes either the whole class or any random member of the class. For example, King Henry VIII (a particular member of a class) was a king of England (the class itself). Answering the following question can help you determine whether a noun is proper. If the answer is yes, the noun is probably a common noun. References http://www.umuc.edu/library/libhow/apa_examples.cfm http://owl.english.purdue.edu/owl/resource/685/03/ http://viewourperspective.blogspot.com/2010_10_01_archive.html

8 Signs Someone Is Lying To You

8 Signs Someone Is Lying To You It is possible to tell when someone is lying to you. Though, hopefully, it could just be nervousness, there are a few red flags that you could keep an eye out for. Any significant combination of the  following tells just might show you the truth about the person in front of you. 1. Voice ChangeIf their voice or general demeanor changes dramatically, this is definitely a sign of discomfort- and quite possibly a lie.2. Psychological DistanceAre they going out of their way to avoid saying â€Å"I† or â€Å"me†? It could be that, consciously or not, they’re trying to put distance between themselves and the lie they’re telling.3. Too Many Right AnswersThis may sound counterintuitive, but if someone has an answer for absolutely everything, you might be a bit suspicious. Most people need to pause to think about their answer to unexpected questions- at least every once in a while. If someone is parroting answers that seem rehearsed and polished and super quick o ff the cuff? That could be an indication of a lie.4. â€Å"I Swear†If the person is proclaiming his or her honestly continuously (â€Å"to tell the truth†¦,† â€Å"to be perfectly honest†¦,† etc.) then they doth protest too much. Actually honest people simply tell the truth without having to broadcast that they’re doing so.5. Fidgeting/FussingIf the person changes their head position rapidly, or can’t stay still, or starts breathing differently, these are all great physical tells that you might be getting fibbed at- especially if they cover their mouth or shuffle their feet or instinctively cover sensitive body parts. Watch the body language for all these clues.6. Difficulty SpeakingIf you watch police confession videos, it sometimes seems like the perp has a hard time getting his or her words out. This is due to an autonomic nervous system reaction that dries the mouth in times of stress. Lip biting and lip pursing aren’t good sig ns either.7. No BlinkingNormal people blink every few seconds. People who are lying might be going overboard to prove they’re maintaining solid eye contact with you by staring a little too strong or too much.8. PerspirationLiterally, you are making this person sweat. If they’re stewing this badly, then chances are they aren’t telling you the truth.

What the Hertzsprung-Russell Diagram Reveals about Stars

What the Hertzsprung-Russell Diagram Reveals about Stars The stars are the most amazing physical engines in the universe. They radiate light and heat, and they create chemical elements in their cores. However, when observers look at them in the night sky, all they see are thousands of pinpoints of light. Some appear reddish, others yellow or white, or even blue. Those colors actually give clues to the temperatures and ages of the stars and where they are in their life-spans. Astronomers sort stars by their colors and temperatures, and the result is a famous graph called the Hertzsprung-Russell Diagram. The H-R diagram is a chart that every astronomy student learns early on. Learning the Basic H-R Diagram Generally, the H-R diagram is a plot of  temperature vs. luminosity.  Think of luminosity as a way to define the brightness of an object. Temperature is something were all familiar with, generally as the heat   of an object. It helps define something called a stars spectral class, which astronomers also figure out by studying the wavelengths of light that come from the star. So, in a standard H-R diagram, spectral classes are labeled from hottest to coolest stars, with the letters O, B, A, F, G, K, M (and out to L, N, and R). Those classes also represent specific colors. In some H-R diagrams, the letters are arranged across the top line of the chart. Hot blue-white stars lie to the left and the cooler ones tend to be more toward the right side of the chart. The basic H-R diagram is labeled like the one shown here. The nearly diagonal line is called the main sequence. Nearly 90 percent of the stars in the universe exist along that line at one time in their lives. They do this while they are still fusing hydrogen to helium in their cores. Eventually, they run out of hydrogen and start to fuse helium.  Thats when they evolve to become giants and supergiants. On the chart, such advanced stars end up in the upper right corner. Stars like the Sun may take this path, and then ultimately shrink down to become white dwarfs, which appear in the lower left part of the chart. The Scientists and Science Behind the H-R Diagram The H-R diagram was developed in 1910 by the astronomers Ejnar Hertzsprung and Henry Norris Russell. Both men were working with spectra of stars- that is, they were studying the light from stars by using spectrographs. Those instruments break down the light into its component wavelengths. The way the stellar wavelengths appear gives clues to the chemical elements in the star. They can also reveal information about its temperature, motion through space, and its magnetic field strength. By plotting the stars on the H-R diagram according to their temperatures, spectral classes, and luminosity, astronomers can classify stars into their different types. Today, there are different versions of the chart, depending on what specific characteristics astronomers want to chart. Each chart has a similar layout, with the brightest stars stretching up toward the top and veering off to the top left, and a few in the lower corners. The Language of the H-R Diagram The H-R diagram uses terms that are familiar to all astronomers, so its worth learning the language of the chart. Most observers have probably heard the term magnitude when applied to stars. Its a measure of a stars brightness. However, a star might appear bright for a couple of reasons:   it could be fairly close and thus look brighter than one farther away; and  it could be brighter because its hotter. For the H-R diagram, astronomers are mainly interested in a stars intrinsic brightness- that is, its brightness due to how hot it actually is. Thats why luminosity (mentioned earlier) is plotted along the y-axis. The more massive the star is, the more luminous it is. Thats why the hottest, brightest stars are plotted among the giants and supergiants in the H-R Diagram. Temperature and/or spectral class are, as mentioned above, derived by looking at the stars light very carefully. Hidden within its wavelengths are clues about the elements are in the star. Hydrogen is the most common element, as shown by the work of astronomer Cecelia Payne-Gaposchkin in the early 1900s. Hydrogen is fused to make helium in the core, so thats why astronomers see helium in a stars spectrum, too. The spectral class is very closely related to a stars temperature, which is why the brightest stars are in classes O and B. The coolest stars are in classes K and M. The very coolest objects are also dim and small, and even include brown dwarfs. One thing to keep in mind is that the H-R diagram can show us what stellar type a star can become, but it doesnt necessarily predict any changes in a star. Thats why we have astrophysics - which applies the laws of physics to the lives of the stars.

Adolescent Behavior Essay Example | Topics and Well Written Essays - 500 words

Adolescent Behavior - Essay Example It is the phase which could not be always unconstructive but it is the phase where the individuals experience thoughtfulness, idealism, understandings for surroundings and self and at the same time they become judgmental. Thus children belonging to this group are more energetic as well as enthusiastic (Thomas, 2008; A Parent's Guide to Surviving the teen years). Understanding is required by the parents to deal with their growing adolescent child. It is the phase that is different for everyone, anytime between 8 years to 14 years. Some of the kids belong to the category of premature bloomers, some are delayed arrivers, some may show speedy developments while others may display steady growth. This onsets the adult signs and child display physical changes. It is essential to understand that with these physical changes comes the behavioral changes as well (Thomas, 2008). It is generally observed that kids illustrate rebellious nature towards parents and start counting more on their frien ds and peers. They believe more what their peers say as compared to what parents are saying, thereby they rely on peers more for any kind of decision. They try to change their outlook and appearance as per the need of time, in doing so they may encounter conflict with the parents. The adolescent kid may face some emotional turmoil as well as they aim in achieving independence in terms of thoughts and in every pursuit.

Organizational Innovation and Change - Critical Thinking Mod 4 Essay - 1

Organizational Innovation and Change - Critical Thinking Mod 4 - Essay Example Such concerns and reservations on the part of the employees must be resolved at the earliest as this is a grave issue which has cropped up at Perrier. One should believe that the key elements behind this resistance to change include the unionization of the employees. It does not sit well with Perrier and needs to be done away with at the earliest. It creates hurdle of sorts for Perrier which is simply an unacceptable proposition. Whether or not Nestle aims to join hands with Perrier, it should not be a concern of the employees who are working under the realms of the union (Trott, 2008). They are after all the loyal employees of Perrier and any lingering thoughts to be more dedicated towards the union itself are a step in the dark for them. Hence all-out consideration needs to be paid towards the unionized philosophy which is creating hurdles for Perrier. In fact, Perrier is self-reliant in its understanding as to how it must go ahead and form significant touch points with Nestle, which is essentially the world’s largest food company. Another key element why the employees are resisting changing is due to the fact that they w ould have to face more stringent policies that Nestle shall bring with it. It would mean that the employees would find it hard to live up to the expectations of Nestle, which is indeed a much sought after name (Saunders, Lewis and Thornhill, 2007). Perrier, on the other hand would not impose similar issues for the employees and the joyride would sustain even in the future as it is being carried out at the present. A change management strategy for Perrier would be devised keeping in mind the adherence of employees towards the unions and how they are actually resisting to the philosophy of change in essence. This is a grave aspect that needs much consideration on the part of the employees, without which there would be

Waterfall Model Vs Prototyping Model

Waterfall Model Vs Prototyping Model Software products developed in todays era are mostly customer oriented. It is either drives the market or it driver by market. Customer Satisfaction was the main aim in the 1980s. Customer Delight is todays logo. Market needs more customers oriented and less emphasizes on the technology. Though the technology factor is always the prime factor behind the deliverables, the product should always satisfy the customer needs. The product development should start focusing on the customer requirements in case of both the retail based products and products developed based on pre-defined specifications. The software products like other engineering products have various types of development or manufacturing strategies to obtain the final output. The most famous software development strategies are as follows: Waterfall Model Evolutionary Model or Prototyping Model Incremental Model Spiral Model The most used models are Waterfall models used for generally small scale projects and single release based software products, whereas the Prototyping Model is used for developing large scale products generally developed in multiple parts rather than single release also called version of release. The software developments strategy I prefer is Prototyping Model. The reason for selecting the Prototyping Model encourages progressive strategic development with course of time. With prototyping model, I am also using non-agile approach and USDP methodology as active part of the development process. The usage of the prototyping non-agile approach and USDP methodology is justified below to be the best choice for my Project. WATERFALL MODEL vs. PROTOTYPING MODEL Waterfall Model is a flow based model which consist of following phases:- 1. System/Information Engineering and Modeling 2. Software Requirements Analysis 3. Systems Analysis and Design 4. Code Generation 5. Testing 6. Maintenance A Waterfall method of software development has to pass through every phase once, and not meant to go back to previous phase again. Once the requirements request made freeze, changes cant be done during any phase. That is why, it is used rarely now a days. Due to this If there is any change in requirements, and then it becomes difficult as well as costly affair. Apart from this each phase takes a lot of time to produce solution for its consecutive next phase as it is irreversible process the solution should be well optimized and satisfactory. If one phase result goes wrong means subsequent phases get effected. Prototyping Model is a technique that uses the technique of replication of few aspects or feature of expected product and it is then developed upon it to obtain the full software. It can be called designing of software prototypes or temporary versions of software program being developed for full edition deliverables. The main theme behind the prototyping is to allow users to evaluate developers proposal for the design of expected product based on real time analysis by user rather than interpreting by the developers themselves. So it is also referred as an efficient way of controlling the prototype that act as a key factor in the commercial relationship between clients and respective solution provider. The client and the contractor can compare if the software made matches the software specification, according to which the software program is built. In Prototype strategy of development as we create a number of Prototypes of the product, before the release of final one. We release number of Prototypes with some differences between them just as versions, and take client opinion, and modify the final Product, as per client suggestions. Prototype is developed by keeping currently known requirements in the mind. Development of prototype undergoes design, coding, testing like phases which give client an actual feel of the system. Prototype is a model which looks exactly like Software development life cycle (SDLC). AGILE MODELvs NON-AGILE MODEL Agile software development is mainly based on iterative development in which solutions are generated from the collaboration between the phases and functional teams of development. The agile software development approach has taken the software developing industry by storm. Agile software development has been en vogue in this decade. It started with the popularity of Extreme Programming (XP) and Kent Becks series of books on the topic. Somewhere it creates a misleading impression that agile is not formal and hence maintenance cost is reduced or controlled by spending more on up-front design. Of course, traditional (non-agile) methods shine in other areas. Agile methods are counter indicated, for example, where there are no system experts, so that only exhaustive study can possibly reveal whats truly needed. Most agile methods are, of course, informal, and so will not work unaltered in a problem area where formality is one of the requirements; but enough agile methods have been formally documented that for any formal project where exhaustive study is NOT a requirement, there should be precedent for using a (formal) agile method. Non-Agile software development provides a traditional simple way to develop software. It reduces the whole cost as well as time consumed in the development. It is less affected from the type of resources. Management information system (MIS) A management information system (MIS) is a process that provides the information which are essential to run an organization professionally. MIS are totally different from regular information systems in that they are used to analyze other information systems applied in operational activities in the organization. Academically, the term is commonly used to refer to the group of information management methods tied to the automation or support of human decision making. MIS are computer-based system that provides managers with the tools for organizing, evaluating and efficiently running their departments. In order to provide past, present and prediction information, an MIS can include software that helps in decision making, data resources such as databases, the hardware resources of a system, decision support systems, people management and project management applications, and any computerized processes that enable the department to run efficiently. MIS are designed for ease of any type of business or organization. Now almost every kind of organization has its own MIS. It is a suite of software applications that together make it possible for people or businesses to store, modify, and extract information from a database. There are many MIS places in your everyday life like in banks, hospitals, hotels; colleges and universities have their own management system. MIS are helpful for organizations and institutes. Universities have their own managements systems. There are many departments in a university like examination, admission, registration, administration, hostel, finance. All these are required a proper and complete management, so for this reason MIS are designed to manage these departments. Every department has its own MIS which is specifically designed to handle its operation like data retrieval, storage and modification. Whenever the internet came every organization and institute is try to provide the better facilities through making their MIS online to satisfy their client. Todays every company and organization is moving on internet and building database in such a way that provided the better facilities and interaction to their clients as compare to past. Library information system (LIS) LIS are designed to record and maintain the information related books and activities of library. LIS plays unavoidable role in a university library because it provides the information about all types of books in a better organized manner. LIS keeps the track of all the books in a university. It contains records of each and every book and the members who borrowed the book. In other aspects LIS also serves as an accounts manager for library. It tracks and calculates possible fines, takes care for member securities and when required provide monetary calculation related to library to the university accounts office which manages university financial resources. The LIS is always ready to share data with the university central accounting system [1]. Traditionally manual file based systems serve as LIS in universities. Registers and note books are used to maintain records for available and borrowed books. A university having multiple departments normally has requirement to maintain a separate register for each department and sometimes for each session a department may demand to have a separate register. This builds a large register set which is very difficult to maintain and is highly error prone. In such scenarios to issue book needs much effort whereas at the same time to calculate and report monetary issues, and perform other managerial tasks may sometimes take days or even weeks. The library user pool is mainly the students and the university staff. Library cards are issued to each of them. When Students or staff members borrow books from library, the librarian needs to search for the relevant register and enter the information of borrower and the borrowed book on relevant page. At the same time he needs to assure that the member should be clear from library issues, the book can be borrowed and it is also his responsibility to provide the member with his time to possess the book. Sometimes members are not known to timings or forget to return the book in time even when they want to return it. In manual management of LIS it is not possible to regulate to process of warnings for library members when their returning dates are near to come. On the very other side where student are staff also feel very difficult to integrate with such system because the most irritating part of this system for them is the time took on any process, either to borrow book or to search book or most irritating when they need their clearance from the library and it take a day to just get a single signature. The only solution to these drawbacks of manual LIS lies in automation of the library information system by computerizing it and integrating with other management systems of a university. By automation of LIS it means to develop a fully computerized system that serves to enable the complete library operations through computers. Automations have some traditional advantages over manual systems like no paper work required and easy to backup, higher consistency of data and it is possible to schedule those tasks which are somewhat impossible in manual systems. Similarly, in context of LIS automation results in ease of library administration, control and tracking processes. The convenience of both librarians and members who use library is increased due to higher decrease of time. It becomes a matter of minutes to perform managerial tasks and estimating monetary matters and many other issues which are never resolved in manual systems. It all becomes wonderful when automation also occurs in making the system online, because through this the system becomes available for 24 hours 7 days a week. It means the student has no need to go through so many book racks to find a book and does not need to go to library to reserve a book. He just needs to go there and get his reserved book. He must not be worried to remember the returning date because he knows that he will be sent an alert indicating the return date of the book he has borrowed. So all this becomes more and more convenient with the increased automation in the process of LIS. LIS Automation for university means to develop a fully computerized system that enables the complete library functions through computers. The system provides the basic set of features to add/update/delete member, add/update/ delete books, search for books, and manage check-in / checkout processes. Automated LIS is designed to meet the needs of libraries both large and small, not only to meet the traditional requirements of a resource centre, but also able to keep track on borrowed books in university. This system is very helpful for university staff, student members and librarians because this system is also interact with the bar code reader and magnetic card reader. When the student and staff members are registered in university they are issued library cards from library. Through this card they can borrow books from the library. When they enter in library their cards are identified through the magnetic card reader and barcode reader is helpful for them in searching the books. The automation of LIS lessens human efforts in university. The maintenance of the records is made efficient, as all the records are stored in the database, through which data can be update, delete and retrieved easily. It also reduced the chance of frauds and errors because all things are computerized. Existing solution EXISTING SYSTEM ARCHITECTURE The existing LIS in university is completely manual and file based. It contains the records of all books and members of the university so this builds a large register set which is very difficult to maintain. In this situation to issue book, return book, fine management, catalog management and member registration verification need much effort whereas at the same time to perform other managerial tasks may sometimes take days or even weeks. C:Documents and SettingsATIFADesktopuntitled.JPG Figure 1: Manual Library System In this system, it is also very difficult to control the process of warnings for library members (student and staff) when their returning dates are near to come. Student and staff members are also faced the problem of book search and borrow. And when they need their clearance from the library, it also takes a day to just get a single signature. In existing manual system all the library members (librarian, staff and students) are faced a lot of difficulties when they are going to issue book, return book, fine management, book catalog management and member registration verification. Issue Book To issue a book in an existing system is a big matter because when student and staff members borrow books from library, the librarian needs to search for the relevant register and enter the information of borrower and the borrowed book on relevant page. At the same time the book can be borrowed when librarian is assured that the member should be clear from library issues. Return Book To return a book process is also very irritating and time consuming as well as the issue book process. Sometimes members are not known to timings or forget to return the book in time even when they want to return it. In this system it is not possible to regulate the process of warnings for library members when their returning dates are near to come because this system is completely manual. Fine Management Because the existing LIS in university is completely manual so the fine management is also a tuff and time consuming task. It is very complicated to tracks and calculates possible fines, takes care for member securities and when required provide monetary calculation related to library to the university accounts office which manages university financial resources. Book Catalog Management University central library contains the records of all books related to its every department and its LIS is manual so the book catalog management is not easy. When members returned the borrowed books then there is no proper management to see is the book is placed at right location or not. To add, delete and search the required book is time consuming process because librarian needs to arrange the proper registers for this. Member Registration Files and registers are used in university for member registration, so that all the student and staff members records are saved on them. When the members information are added, deleted and updated the entries in associated registers are also updated which required a large amount of time. Student and staff members registration information is also required to LIS to issue the library cards of each of them. Library staff adds all these information in registers to keep the track of members of LIS so this is also required enough time. The complete functions of existing system are shown in figure. It represents the overall functionality of library in university. Proposed System Architecture Scope of Proposed System Library System is a library information and knowledge management system. This application is used to support a librarian in managing a book library in university. The system is designed to provide the basic set of to add, delete or update members, add, delete or update books, and search for books processes. The main focus of this system is to reduce human efforts. The maintenance of the records is made efficient, as all the records are stored in the database, through which data can be retrieved easily. Some of the other specific objectives of the Library System are as following: Minimum amount of work should be required. Special hardware such as bar code reader and magnetic card reader should be used with this system for security and efficiency. Permanent storage of data should be done easily by using the database instead of the registers. It provides the interface for librarians to interact with the backend library database. It provides the interface to add, delete or update new student and staff member in the database. It also provides the interface to add, delete or update book information in the book database. GUI to search for a book based on user inputs. It provides the interface to check out of books which are issued by student and staff member. It also checks in the books which are returned by student and staff member. Calculate and manage the record for fine. Provide a facility to automatically send reminders to university members when required. Product Perspective The Library System is developed for the library to help the staff members, students and Librarians to search and borrow books. The system provides information related to books to the members of the library. The Librarian can keep the tracks of books updated all the time so that the student and the staff members get the up to date information all the time. This system is developed to interact with its users like librarian students and staff members of the university. The system has to interact with other systems like: Library System, Member Registration System, Catalog Management System, Accounting System, Email System, Fine and Reminder Bot System, Purchase Management System, and Online Client System of university. Software Requirment specifications Introduction The library system provides the information about the books available in the Library. It provides different type of services for its users, such as reserve book, renew book, check items, and check fines and view hold requests in the account. The following requirements specifications and required functions of the Library System are given below: Library members The Library has university staff and students as its members. All members must be registered with the library and issued with Username and Password for accessing their account in Library System. Book issue and return When a library member login via his account he can issue books. The system restricts the borrow limits as this a staff member can borrow up to 4 books up to 4 weeks and a student can borrow up to 2 books for up to 2 weeks. When a book is borrowed or returned by the library member, the information should be captured in the system and the account of the member should be updated. Only book items can be issued in library, currently journals and magazines should only be read in the library. Fine calculation and send late book reminders The system is able to calculate fines and send reminders to members automatically. When a return date is overdue, information about overdue items, overdue days and accumulated fines is sent to the user via email. Adding and deleting books Librarian is responsible to maintain the information about catalogues and library members. He can add, update and delete books in database. Querying to find books The system provides search functions to library members they can search a book through online catalogue. All book items in library are searched either by ISBN No or Author. Report generation Library system generates reports for the system administration automatically. User characteristics The main users of the system are student and staff members, librarian of the university who maintain the system. It is assumed that the members and librarian have the basic knowledge of internet and computers. This system ensures that the system administrator have enough knowledge of the internals of the system such as he is able to correct the small problems like disk crashes and power failure. The proper GUI, users manual, online help and the guide to install and maintain the system must be provided with the system to educate the users. System Constraints All the users information must be stored in a database that is accessible by the library system. The library system is connected to the university server and that is available 24 hours. The library system is accessible for the users who have internet connection with their computers in university. The Member Registration System, Catalog Management System, Accounting System, Email System, Fine and Reminder Bot System, Purchase Management System, and Online Client System are connected to the Library System and the database used by these systems must be compatible with the interface of the System. The users login into Library System through their username and password which they are assigned. System Assumptions and Dependencies Enough knowledge of computers should be required. To access the system online in university internet connection should be required. Library system can access the university student database. Microsoft SQL Management studio 2005 to store the database. To developed the product by using ASP.Net and C #.Net. Requirements For the Online Table Booking system following features will be provided to the customers related to table reservation. Students/Staff Requirements Search Books Search Issue Book by Student/Staff ID Search Reserve Book by Student/Staff ID Get Fine by Student/Staff Get Total Fine for Student/Staff Analysis Models Design Models The Physical design of the system is developed from logical design, which is completely based on logical design [9]. It is completely based upon the relationship among the data rather than the storage structures. The systematic organization of data which is used in automated system makes a database different form of record keeping [10]. While designing the database for the system, theses facts such as data integration, data sharing, no redundancy and data consistency have been taken care. Physical design consists of Table Design and Specifications. Database Physical Schema Tools and Technologies Tools and technologies refer to the text which describes the used and required technical specifications of the designed system. The system is a kind of information system which is targeted to be an n-tier application without losing desktop application style. The requirement to be n-tier and also to have a desktop application demands for a technology combination where following areas can be integrated to build up the system. Centralized data source Interoperability Ease of use Integrity Availability Integrating with the existing system Rapid development All these areas have their own constraints, some of which make it difficult to introduce them in a single system. While our technology study our team was working to find a solution that can help us in such a situation. In earlier stages we had an idea to provide a client server application where the data source will be centralized server and clients will call that for data services. This idea could have worked if the available time was not very short, so we left this option. Later we found a better solution to design a web application that provides the required services and we started working upon that but soon our team found a complete solution that had solved our problems. Creating a web application has some constraints which are number 2 and 3 in the above list. These constraints were removed by the new solution where we shifted to service oriented architecture and used a protocol based approach to provide data to our client application; this architecture is named as SOAP Service Oriented Architecture Protocol. Deciding finally on our system architecture we decided to use the same database management system, which is used by the university website. This decision was to support to integration of the new product with the old system and for the same reason we had used the web technology used by the website. One of the targets of the system design was to lower the cost for the deployment of the developed system, because it will only add up with the existing system and no changed will be required. On the other side no need to buy or manage or maintain any new server. It will just require simple system with required software packages installed and the system will start providing its services. Normally there will be no need to configure the client side application. The coming text will describe the software technologies which were used to design the software with their justification to use them. Server Side: Server side was build with following technologies: ASP.NET The reason to use this web technology is already described above. The website for University of Sargodha is designed using ASP.NET and is currently active and working. So to support integration with the existing web application our team decided that we must use the same technology there are using. It is very famous Microsoft technology and is used to build any kind of web solutions from simple personal websites to n-tire enterprise level web application. In comparison with other similar technologies like PHP and Java Server Pages it focuses on development of quality products rapidly. MSSQL Server 2005 MSSQL server is a database management system which is a product of Microsoft. It is very famous with medium scaled data driven business solutions. It supports client server architecture and at the same time it also provides parallel user access to the databases. Such kind of DBMS also sounds good for web technologies. In normal practice MYSQL another DBMS is used more frequent on web due to the compatibility of MYSQL with LINUX / UNIX based operating systems. MSSQL is only compatible with Windows based operating systems. Similar is the case with ASP.NET, from the introduction of MSSQL 2005 and ASP.NET both are known to be the best for each other for web technologies. The university website is also using the same combination and that is why we also are using the same technology. Web Services Web Services are a technology which is derived to provide a central source not only to provide data but also to receive data. There are many pros when we talk about this technology. Its expandability is inherited from web. Similar to a website a web service can also have unlimited number of clients, only constrained by the hosting server of the web service. This was the biggest reason to use web services in the designed solution. It does not cause change in the existing architecture of the system, but just add to the existing system. This kind of integration ability was very useful for the designed system. Web service use a protocol named SOAP which uses xml to transfer data to/from the clients of the web service. The global nature of xml enables another option in web services, that they do not restrict their clients to be the one kind of system. Any system, which can generate the kind of xml schema required for a web service and can receive and interpret the returned xml document from the web service, can call it. Another reason that made us to use the web services was the ease to call them, we called them from our desktop application where they worked just like normal routine calls, and it made it easier to proceed with the same system. Crystal Reports This technology refers to generating reports from vast data to support business decision; in our system we used crystal reports to generate several reports which are help full in providing the results regarding the library information to higher management. The reason to use this technology was to make it easier to generate reports. We concluded the ease with crystal reports from there automatic database interpretation and retrieving objects from the database schema to design reports. Reports designed in crystal reports are also not very specific to IT; their design can be modified by any designer so university is not constrained to us for required change after the deployment. Client Side: .NET The name Dot Net refers to a Microsoft technology framework which is intended to design managed and secure applications. The reason we used this framework was the ease and speed of development which is supported by .NET. The application, build on .NET assemblies needs .NET to be installed on the system where the application has to run. Our client application requires pre installation of .NET on the hosting system to run on it. The application was built using .NET 2.0 so at least .NET 2.0 or any newer version can support the application. Visual C# It is a programming language with is supported by .NET development environments. The reason to choose this language was to focus on the functionality of the system rather than bug fixing. Communication Method The server side of the system has to be deployed on a web server with the existing website. So considering this the system uses Ethernet as the communication medium to send and receive data from web services. To call/discover the web services the system uses HTTP protocol to send and receive requests to web services. Browser Technology While developing the web based interface, we have tried to make it well formed on most famous browsers which are IE6, Firefox 3.0 and Chrome 1.0. In all of these browsers it has almost similar and well formed look and feel. Another browser is targeted theoretically, which is safari. But this browser is not tested. Regarding to studied problems most of the layout is static which has a complete compatibility in all browsers. No layout uses absolute or relative positioning. System Evaluation introduction The library information management system is designed and developed using the client server architecture and is implemented

Nineteen century poetry trends Essay

Metastasio’s reform of the operatic libretto was paralleled in the mid-18th century by Goldoni’s reform of comedy. Throughout the 17th century the commedia dell’arte—a colourful pantomime of improvisation, singing, mime, and acrobatics, often performed by actors of great virtuosity—had gradually replaced regular comedy, but by the early 18th century it had degenerated into mere buffoonery and obscenity with stereotyped characters (maschere, â€Å"masks†) and mannerisms. The dialogue was mostly improvised, and the plot—a complicated series of stage directions, known as the scenario—dealt mainly with forced marriages, star-crossed lovers, and the intrigues of servants and masters. Goldoni succeeded in replacing this traditional type of theatre with written works whose wit and vigour are especially evident when the Venetian scene is portrayed in a refined form of the local dialect. Perhaps because of his prolific output his work has sometimes been thought of as lacking in depth. His social observation is acute, however, and his characters are beautifully drawn. La locandiera (1753; â€Å"The Innkeeper†; Eng. trans. Mirandolina), with its heroine Mirandolina, a protofeminist, has  things to say about class and the position of women that can still be appreciated today. Goldoni’s rival and bitter controversialist, fellow Venetian Carlo Gozzi (the reactionary brother of the more liberal journalist Gasparo), also wrote comedies, satirical verse, and an important autobiography. His Fiabe teatrali (1772; â€Å"Theatrical Fables†) are fantastic and often satirical. Among them are L’amore delle tre melarance (The Love for Three Oranges), later made into an opera by Sergey Prokofiev, and the original Turandot, later set to music by Giacomo Puccini. The world of learning Giambattista Vico, Ludovico Antonio Muratori, Apostolo Zeno, and the already mentioned Scipione Maffei were writers who reflected the awakening of historical consciousness in Italy. Muratori collected the primary sources for the study of the Italian Middle Ages; Vico, in his Scienza nuova (1725–44; The New Science), investigated the laws governing the progress of the human race and from the psychological study of man endeavoured to infer the laws by which civilizations rise, flourish, and fall. Giovanni Maria Mazzuchelli and Gerolamo Tiraboschi devoted themselves to literary history. Literary criticism also attracted attention; Gian Vincenzo Gravina, Vico, Maffei, Muratori, and several others, while advocating the imitation of the classics, realized that such imitation should be cautious and thus anticipated critical standpoints that were later to come into favour. The Enlightenment (Illuminismo) With the end of Spanish domination and the spread of the ideas of the Enlightenment from France, political reforms were gradually introduced in various parts of Italy. The new spirit of the times led men—mainly of the upper middle class—to enquire into the mechanics of economic and social laws. The ideas and aspirations of the Enlightenment as a whole were effectively voiced in such organs of the new journalism as Pietro Verri’s periodical Il Caffà ¨ (1764–66; â€Å"The Coffeehouse†). A notable contributor to Il Caffà ¨ was the philosopher and economist Cesare Beccaria, who in his pioneering book Dei delitti e delle pene (1764; On Crimes and Punishments) made an eloquent plea for the abolition of torture and the death penalty. More than anyone else, Giuseppe Parini seems to embody the literary revival  of the 18th century. In Il giorno (published in four parts, 1763–1801; â€Å"The Day†), an ambitious but unfinished social satire o f inherited wealth and nobility, he describes a day in the life of a young Milanese patrician and reveals with masterly irony the irresponsibility and futility of a whole way of life. His Odi (1795; â€Å"Odes†), which are imbued with the same spirit of moral and social reform, are among the classics of Italian poetry. The satire in the Sermoni (1763; â€Å"Sermons†) of Gasparo Gozzi (elder brother of Carlo) is less pungent, though directed at similar ends, and in his two periodicals—La Gazzetta veneta and L’Osservatore—he presented a lively chronicle of Venetian life and indicated a practical moral with much good sense. Giuseppe Baretti—an extremely controversial figure who published a critical journal called La Frusta letteraria (â€Å"The Literary Whip†), in which he castigated â€Å"bad authors†Ã¢â‚¬â€had learned much through a lengthy sojourn in England, where his friendship with Samuel Johnson helped to give independence and vigour, if not always accuracy, to his judgments. The Viaggi di Enrico Wanton (1749–64; â€Å"Travels of Enrico Wanton†), a philosophical novel by the Venetian Zaccar ia Seriman, which tells of an imaginary voyage in the manner of Jonathan Swift and Voltaire, was the most all-embracing satire of the time. Anthony Oldcorn Literary trends of the 19th century The 19th century was a period of political ferment leading to Italian unification, and many outstanding writers were involved in public affairs. Much of the literature written with a political aim, even when not of intrinsic value, became part of Italy’s national heritage and inspired not only those for whom it was written but all who valued freedom.

Analysis Of Automat By Edward Hopper - 732 Words

A Bleak Seclusion Loneliness. A choice or an imposition, it can sometimes be hard to simply shut out the world and listen to the world in our minds. Rather, as our populations and communities continue to swell, our social inclination only encourages us to broaden our relationships. In the search for a companion to disclose our superficial thoughts to, the painting Automat by Edward Hopper reminds me that it’s important to set aside a little time for self-reflecting, so that I may learn more about the one companion that I have for life: myself. Painted at the height of the Roaring Twenties in 1927, this Hopper painting depicts a solitary woman sat at a table in an automat, hence the title. The painting itself is muted and cold, complete†¦show more content†¦A comment I found especially intriguing was one of a journalist named James Peacock, who, in reference to the Automat, said, â€Å"with vivid colours against dark shades, Hopper has a knack for capturing humanity’s default state of isolation.† According to Peacock, the woman, like all of us, is a naturally introverted creature, and while I disagree that humans do not crave interaction, I appreciate Peacock’s description of how Hopper’s color scheme strengthens the somber mood. Additionally, the empty chair across from her further symbolizes that she is without company as the vacant furniture accentuates the mostly unoccupied space. While it remains unknown as to what the woman’s plan is, it can be concurred that the woman is me ant to symbolize reclusiveness. Conversely, in a more technical sense, automats have found a slight resurgence within the last few years with the opening of Eatsa in San Francisco (Stein). In short, automats are glorified vending machines, equipped with tables for eating the meals you bought sans human interaction. But this lack in the formality of ordering from a human being creates the dilemma of what automats will mean for us as a society. The practice of social situations can often be found in the interactions of those in the service industry, and Hopper’s painting only increases my confidence in the hypothesis that automats have a foreseeable future in creating a less social community. The woman sat by herself obviously